The main machine part of the round wood sliding table saw includes the machine bed, worktable, longitudinal section and cross section guide plate, main saw, scoring saw, transmission and other parts. It can be used as an ordinary circular saw. After the machine is started up, the sawing can be carried out only after the rotation speed is normal. When sawing, it is not allowed to shake the wood from left to right or lift it up. In case of knots, it is required to feed the wood slowly and uniformly. The saw blade cooling device is not easy to burn the saw blade, thus prolonging the service life of the saw blade. The saw blade rises automatically when working, and lowers automatically after finishing. Generally, the balance of the guide rail determines the stability of the saw when running. Whether it is a circular guide rail or a square guide rail, it must meet the above standards to ensure the normal operation of the machine.
Compared with the traditional band saw, the round wood sliding table saw is suitable for processing all kinds of hard and miscellaneous wood with a length of less than 2 meters and different caliber round wood with a length of less than 40 cm. The product specifications can be adjusted at will. High safety performance, convenient operation and simple maintenance. The sawing surface is smooth and flat, and pneumatic clamping is adopted, which is convenient and fast. Some materials that are not easy to handle can be fully processed and utilized to improve the utilization rate of raw materials. The operation is simple and safe. However, there are requirements for the diameter and length of round logs. The produced round logs have no saw marks, and the operation is simple and safe.
